With 90W of spraying power at your disposal, the high-performance volume spray (vS) is able to apply even the most viscous materials – a spray gun for jams, sauces, and thick materials and no need for compressed air. This model is for spraying large volumes of material as the vacuum power of the volumeSPRAY vS can provide a direct feed from a larger floor-based container by using the extension tube. The suction tube extension allows customers to use their KREA Swiss volumeSPRAY (vS) gun to spray from a larger floor-based container.
The volumeSPRAY (vS) does what brushing and paint guns can’t!
In addition to spraying thick materials, this “food safe” handheld gun also provides fast and accurate greasing of baking sheets & tins or can be used for any number of materials and applications. It is fast, economical, accurate, and food industry-approved; the alternative to the brush or nonfood regulation-compliant paint gun.
Used throughout the food industry: Bakeries, Cake shops, Butchers, Hotels, Hospitals, Canteens, Restaurants, Food Factories, and Fast Food outlets.
Advantages:
· 90 Watt spraying with top performance- for medium to high viscosity materials.
· Saves time: minimum work effort with the highest delivery rates.
· From thick to fine spray finish- excellent material distribution.
· Fast ROI- due to less use of material.
· “Food Safe”.
· Simple to use with a balanced design. Compressed air not required.
· Hygenic- easy to take completely apart and clean.
· Swiss made- solid engineering quality
Each volumeSPRAY (vS) order is equipped with the following accessories:
· a suction extension tube
· an F7S flat-fan nozzle with bent nozzle extension (F7S)
· a round-jet-nozzle (R8)
· a container (700ml)
Technical | |
Rated Power | 90 W |
Dynamic pressure max. (bar) | 180 |
Delivery rate max. (water) | 350 g/min |
Viscosity max. (DIN-sec.) | 100 |
Piston | Tungsten Carbide |
Pump cylinder | Tungsten Carbide |
Container Capacity | 700 ml |
Nozzle type | F7S flat jet nozzle with bent nozzle extension and round-jet-nozzle R8, 2m suction tube extension. |
Wire Length | 1.8 m |
Bent Nozzle Extension | No |
Country of Origin | Switzerland |
Art.-Nr. | 09-211-001 |
Reviews
There are no reviews yet.